Car Power Delivery chargers
-
[Anker Car Charger 167.5W (2C1A)] • Reset-free • P̶D̶1̶2̶V̶ • S22-24(Plus/Ultra) 45W • S̶2̶5̶(̶P̶l̶u̶s̶/U̶l̶t̶r̶a̶)̶ 4̶5̶W̶ • P̶i̶x̶e̶l̶ 9̶/1̶0̶ P̶r̶o̶ X̶L̶ 3̶7̶W̶ • R̶a̶s̶p̶b̶e̶r̶r̶y̶ P̶i̶5̶ • A̶V̶S̶
-
[Baseus 160W car charger 3 ports (2C1A)] • Reset-free • PD12V • S22-24(Plus/Ultra) 45W • S25(Plus/Ultra) 45W • Pixel 9/10 Pro XL 37W • R̶a̶s̶p̶b̶e̶r̶r̶y̶ P̶i̶5̶ • A̶V̶S̶
-
[LISEN 54W PD&QC Car Charger (1C1A)] • R̶e̶s̶e̶t̶-̶f̶r̶e̶e̶ • PD12V • S̶2̶2̶-̶2̶4̶(̶P̶l̶u̶s̶/U̶l̶t̶r̶a̶)̶ 4̶5̶W̶ • S̶2̶5̶(̶P̶l̶u̶s̶/U̶l̶t̶r̶a̶)̶ 4̶5̶W̶ • P̶i̶x̶e̶l̶ 9̶/1̶0̶ P̶r̶o̶ X̶L̶ 3̶7̶W̶ • R̶a̶s̶p̶b̶e̶r̶r̶y̶ P̶i̶5̶ • A̶V̶S̶
-
[Xiaomi 100W Car Charger (1C1A)] • Reset-free • PD12V • S22-24(Plus/Ultra) 45W • S25(Plus/Ultra) 45W • Pixel 9/10 Pro XL 37W • R̶a̶s̶p̶b̶e̶r̶r̶y̶ P̶i̶5̶ • A̶V̶S̶
Anker Car Charger 3 ports (2C1A), 167.5W Max
Product key benefits:
-
Supports 12V and 24V on-board vehicle power supply.
-
The voltage of the on-board network of a car does not affect the charging. The adapter is built on the principle of buck-boost ie can decrease or increase the output voltage depending on the request of the charged device. characteristics of the device.
-
3 output ports 2 UsbC, 1 UsbA
-
Power distribution between ports when used simultaneously:
-
2 ports: 100W(C1)+45W(C2) / 100W(C1)+22.5W(A)
-
3 ports: 100W(C1)+45W(C2)+22.5W(A)
-
-
Operation of all three ports is independent and the power supply is not changed when a new device is connected.
-
Energy conversion efficiency - 90%.
-
PPS 5-11V5A support, together with a cable rated for 5A (100W/240W), will provide the fastest possible Super Fast Charge 2.0 45W charging for Samsung S22, S23 and S24 smartphones (Plus and Ultra versions).
-
The kit comes with a quality UsbC-UsbC cable 1m with support for 100W (20V5A) and USB3.2, resistance 120mOhm.
-
Load testing: 100W-30min:
-
Throttling detected after 10minutes
-
Maximum detected temperature 63°C
-
-
Load testing: 65W-30min:
-
Throttling was not detected, power output was stable.
-
Maximum detected temperature 57°C
-
-
Weight: 51grams
-
Diameter (head):36mm, Length:81mm
Product drawbacks:
-
The adapter cannot provide 100W of power for longer than 10 minutes, but it can maintain 65W consistently.
Supported charging protocols claimed by manufacturer:
-
UsbC1:
-
PD3.0: 5V3A, 9V3A, 15V3A, 20V5A
-
-
UsbC2:
-
PD3.0: 5V3A, 9V3A
-
PPS (5-11V5A) - max 45W
-
-
UsbA:
-
5V3A, 9V2A, 10V2.25A (22.5W max)
-
Supported charging protocols detected by KM003C:
-
USB-C1 port:
-
PD3.0 100W, PPS, QC4+ (Fixed 5V,9V,15V-3A, 20V5A, PPS: 5-11V5A)
-
FCP 18W (5.2V2A, 9V2A)
-
SCP 22W (3.3V-10V, 0.03A-2.2A)
-
AFC 18W (5V2A,9V2A)
-
QC2.0/3.0 (5V, 9V, 12V, 3.6-12V)
-
DCP 5V1.5A
-
APPLE 2.4A
-
-
USB-C2 port:
-
PD3.0 27W, PPS, QC4+ (Fixed 5V,9V-3A, PPS: 5-11V5A)
-
FCP 18W (5.2V2A, 9V2A)
-
SCP 22W (3.3V-10V, 0.03A-2.2A)
-
AFC 18W (5V2A,9V2A)
-
QC2.0/3.0 (5V, 9V, 3.6-9V)
-
DCP 5V1.5A
-
APPLE 2.4A
-
-
USB-A port:
-
FCP 18W (5.2V2A, 9V2A)
-
SCP 22W (3.3V-10V, 0.03A-2.2A)
-
AFC 18W (5V2A,9V2A)
-
QC2.0/3.0 (5V, 9V, 3.6-9V)
-



You can buy this item here:
Baseus 160W car charger 3 ports (2C1A)
Product key benefits:
-
Supports 12V and 24V on-board vehicle power supply.
-
The voltage of the on-board network of a car does not affect the charging. The adapter is built on the principle of buck-boost ie can decrease or increase the output voltage depending on the request of the charged device. characteristics of the device.
-
3 output ports 2 UsbC, 1 UsbA
-
Operation of all three ports is independent and the power supply is not changed when a new device is connected.
-
Power distribution between ports when used simultaneously:
-
2 ports: 100W+30W
-
3 ports: 100W+30W+30W
-
-
Energy conversion efficiency - 85.7%.
-
PPS 3.3-21V5A support, together with a cable rated for 5A (100W/240W), will provide the fastest possible Super Fast Charge 2.0 45W charging for Samsung S22, S23 and S24, S25 smartphones (Plus and Ultra versions) and will also provide a maximum of 37W for the Google Pixel 9/10 Pro XL..
-
The kit comes with a quality UsbC-UsbC cable 1m with support for 100W (20V5A), resistance 90mOhm.
-
Load testing: 100W-30min:
-
The thermal protection shut off the power after 27 minutes.
-
Maximum detected temperature 79.3°C around UsbC2 port.
-
-
Weight: 55grams
-
Diameter (head):42.6mm, длина:76.4mm
Product drawbacks:
-
The adapter cannot provide 100W of power for longer than 27 minutes; stable operation is possible at 80W output power.
Supported charging protocols claimed by manufacturer:
-
UsbC1:
-
5V3A, 9V3A, 12V3A, 15V3A, 20V5A (100W max)
-
-
UsbC2:
-
5V3A, 9V2.22A, 12V2.5A, 15V2A, 20V1.5A (30W max)
-
-
UsbA:
-
5V4.5A, 4.5V5A, 9V2A, 10V2.5A (30W max)
-
Supported charging protocols detected by KM003C:
-
USB-C1 port:
-
PD3.0 100W (Fixed 5V,9V,12V,15V-3A, 20V5A, PPS: 3.3-21V5A)
-
QC2.0/3.0 (5V, 9V, 12V, 20V, 3.6-20V)
-
FCP 18W (5.2V2A, 9V2A, 12V1.5A)
-
SCP 18W (3.3V-5.5V, 0.03A-3A)
-
AFC 18W (5V2A,9V2A,12V2A)
-
MTK PE+, MTK PE+2.0
-
DCP 5V1.5A
-
Samsung 2A
-
APPLE 2.4A
-
-
USB-C2 port:
-
PD3.0 30W (Fixed 5V3A,9V2.25A,12V2.5A,15V2A,20V1.5A)
-
QC2.0/3.0 (5V, 9V,12V 3.6-12V)
-
FCP 18W (5.2V2A, 9V2A,12V1.5A)
-
AFC 24W (5V2A,9V2A,12V2A)
-
MTK PE+, MTK PE+2.0
-
DCP 5V1.5A
-
APPLE 2.4A
-
-
USB-A port:
-
QC2.0/3.0 (5V, 9V, 12V, 3.6-12V)
-
FCP 18W (5V2A, 9V2A, 12V1.5A)
-
SCP 25W (3.4V-5.5V, 0.03A-5A)
-
AFC 18W (5V2A, 9V2A)
-
MTK PE+, MTK PE+2.0
-
VOOC
-
DCP 5V1.5A
-
APPLE 2.4A
-







You can buy this item here:
Amazon.com | Amazon.de | AliExpress | Allegro
LISEN 54W PD&QC Car Charger (1C1A)
Product key benefits:
-
Very compact device
-
2 output ports 1 UsbC, 1 UsbA
-
Supports from 12V to 24V on-board vehicle power supply.
-
The voltage of the on-board network of a car does not affect the charging characteristics of the device.
-
The adapter is built on the principle of buck-boost ie can decrease or increase the output voltage depending on the request of the charged device.
-
Energy conversion efficiency based on tests >=88.5% (36W).
-
Load testing:
-
36W (12V3A PD) - 30min:
-
Throttling was not detected, power was table.
-
Maximum detected temperature 74.2°C (near UsbA port)
-
-
-
Weight: 16.7 grams
-
Diameter (head): 24mm, Length: 46mm
Product drawbacks:
-
The adapter cannot provide the stated 54W of power, maximum 36W (USB-C) when using only USB-C.
-
When connecting a second device, power to the already connected device is interrupted, the total power is reduced (18W max), and the charging protocol changes (USB-C - PD 5V max, USB-A - DCP 5V).
-
PPS 5A is not supported, which prevents SFC2.0 from being activated for Samsung S22-S24 plus/ultra.
Supported charging protocols claimed by manufacturer:
-
UsbC:
-
5V3A, 9V3A, 12V3A, 3.3-11V3A
-
-
UsbA:
-
5V3A, 9V3A, 12V1.5A
-
Supported charging protocols detected by KM003C:
-
UsbC port:
-
PD3.0 36W, PPS (Fixed 5V,9V,12-3A, PPS: 3.3-11V3A)
-
FCP 18W (5V2A, 9V2A, 12V1.5A)
-
SCP 30W (3.6V-12V, 0.5A-2.5A)
-
AFC 18W (5V2A, 9V2A)
-
QC2.0/3.0 (5V, 9V, 12V, 3.6-12V)
-
SFCP
-
APPLE 2.4A
-
DCP 5V1.5A
-
-
UsbA port:
-
FCP 18W (5V2A, 9V2A, 12V1.5A)
-
AFC 18W (5V2A, 9V2A)
-
SFC 18W (3.4-10V, 0.03-2A)
-
QC2.0 (5V, 9V, 12V, 3.6-12V)
-
SFCP
-
APPLE 2.4A
-
DCP 5V1.5A
-




You can buy this item here:
Xiaomi 100W Car Charger (1C1A)
Product key benefits:
-
2 output ports 1 UsbC, 1 UsbA
-
Operation of all ports is independent and the power supply is not changed when a new device is connected.
-
Supports from 12V to 24V on-board vehicle power supply.
-
The voltage of the on-board network of a car does not affect the charging characteristics of the device.
-
The adapter is built on the principle of buck-boost ie can decrease or increase the output voltage depending on the request of the charged device.
-
Energy conversion efficiency based on tests - 87% (60W), 83% (80W).
-
Support for the PPS 5-21V5A protocol, together with a cable rated for 5A (100W/240W), will ensure the fastest possible charging for Samsung S22, S23, S24, S25 (Plus and Ultra versions) (45W), Google Pixel 9 Pro XL (37W), and Google 10 Pro XL (45W).
-
The set includes a high-quality 1m USB-C to USB-C cable with 100W (20V5A) and USB 2.0 support, 80mOhm resistance.
-
LED indication signaling that charger is powered.
-
Testing showed PD 3.0 support only up to 45W, higher power is only achieved with the PPS/Xiaomi Hypercharge protocol.
-
Load testing:
-
100W (20V5A PPS):
-
under load, the power supply stopped.
-
Unable to ensure charging with 5A current at 18V and 16V
-
-
80W (20V4A PPS)-11min:
-
Heating reached 80°C and throttling began with power limited to 40W. After cooling, operation resumed.
-
-
65W-30min:
-
Throttling was not detected, power was table.
-
Maximum detected temperature 70°C
-
-
-
Weight: 36grams
-
Diameter (head):33.4mm, Length:74.8mm
Product drawbacks:
-
The adapter cannot provide 100W of power and operate at a current of 5A. 80W of power is provided for only 11 minutes, after which thermal protection and throttling are activated.
-
PD 3.0 is only available with a power output of up to 45W, but this is sufficient for the vast majority of smartphones on the market.
Supported charging protocols claimed by manufacturer:
-
UsbC:
-
20V5A
-
-
UsbA:
-
5V3A, 9V2A
-
Supported charging protocols detected by KM003C:
-
UsbC port:
-
PD3.0 45W, PPS (+Xiaomi) (Fixed 5V,9V,12,15V-3A,20V2.25A, PPS: 5-11V5A, PPS 5-21V5A)
-
FCP 18W (5.2V2A, 9V1.67A)
-
SCP 30W (3.6V-12V, 0.5A-2.5A)
-
AFC 24W (5V2A, 9V2A, 12V2A)
-
QC2.0/3.0 (5V, 9V, 12V, 3.6-20V)
-
DCP 5V1.5A
-
-
UsbA port:
-
FCP 18W (5.2V2A, 9V2A)
-
AFC 18W (5V2A, 9V2A)
-
QC2.0 (5V, 9V, 12V)
-
APPLE 2.4A
-




You can buy this item here:
Amazon.com | Amazon.de | AliExpress | Allegro
Additional information:
-
USB fast charging technologies review
-
USB cables review and testing
